Solving of the inverse problem for a multielement airfoil in a compressible viscous gas flow

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

An iterative method for solving the inverse problem for a multielement (slotted) airfoil at high speeds in a viscous compressible flow, using RANS methods, has been developed. It is an evolution of a similar method developed earlier by the authors for low speed conditions. The method is based on the well-known principle of residual correction, according to which corrections to the current geometry are generated on the basis of the difference between the target and current pressure distribution. A brief description of the algorithm and the methods used is given. Examples for the slotted airfoil design corresponding to the target pressure distribution are given, including cases with the shock waves existence.

全文:

受限制的访问

作者简介

A. Bolsunovsky

Central Aerohydrodynamic Institute

编辑信件的主要联系方式.
Email: bolsmail@mail.ru
俄罗斯联邦, Zhukovsky

N. Busoverya

Central Aerohydrodynamic Institute

Email: bolsmail@mail.ru
俄罗斯联邦, Zhukovsky

S. Gerasimov

Central Aerohydrodynamic Institute

Email: bolsmail@mail.ru
俄罗斯联邦, Zhukovsky

M. Gubanova

Central Aerohydrodynamic Institute

Email: bolsmail@mail.ru
俄罗斯联邦, Zhukovsky

参考

  1. Rumsey C.L., Ying S.X. Prediction of high lift: review of present CFD capability // Progr. in Aerospace Sci., vol. 38, 2002, pp. 145–180.
  2. Golubev V.V. Research on the slotted wing theory. Part I // Tr. TsAGI, 1933, iss. 147. (in Russian)
  3. Golubev V. V. Research on the slotted wing theory. Part II // Tr. TsAGI, 1937, iss. 306. (in Russian)
  4. Smith A.M. High-lift aerodynamics // J. of Aircraft, 1975, vol. 12, no. 6.
  5. Petrov A.V., Skomorokhov S.I. High-Lift Wings Aerodynamics. TsAGI – Main Stages of Scientific Work in 1993–2003. Moscow: Fizmatlit, 2003. p. 95–104. (in Russian)
  6. Del Rosario R., Follen G., Wahls R., Madavan N. Subsonic fixed wing project overview of technical challenges for energy efficient, environmentally compatible subsonic transport aircraft // AIAA Aerospace Sci. Meeting, Nashville. 2012.
  7. Bolsunovsky A.L., Buzoverya N.P., Gubanova I.A., Gubanova M.A. Solution of the inverse problem for an airfoil in the framework of RANS-equations // TsAGI Sci. J., 2013, vol. 44, no. 3. (in Russian)
  8. Bolsunovsky A.L., Buzoverya N.P., Gubanova I.A. et al. Solution of the inverse problem for a multi-element airfoil in the framework of RANS-equations // TsAGI Sci. J., 2021, vol. 52, no. 3. (in Russian)
  9. Drela M. Design and optimization method for multi-element airfoils // AIAA-93-0969, 1993.
  10. Matsushima K., Shiokawa M., Nakahashi K. An efficient inverse aerodynamic design method for multi component devices // ICAS-2004, Paper 356.
  11. Jones D., Fejtek I. Inverse design of high lift systems // ICAS-2002. 2.4.5.
  12. Bolsunovsky A.L., Buzoverya N.P., Puschin N.A. Solution of the inverse problem for full cruise layout of the passenger aircraft with the use of RANS-equations // TsAGI Sci. J., 2020, vol. 51, no. 1. (in Russian)

补充文件

附件文件
动作
1. JATS XML
2. Fig. 1. Calculated and experimental [1] pressure distribution on a multi-link profile, M = 0.2, Re = 9×106, α = 16°

下载 (120KB)
3. Fig. 2. NASA slotted wing concept [6]

下载 (134KB)
4. Fig. 3. The principle of constructing residual correction methods

下载 (26KB)
5. Fig. 4. Structure of the method used

下载 (41KB)
6. Fig. 5. Splitting of the pressure discrepancy into subsonic and supersonic parts.

下载 (69KB)
7. Fig. 6. Structured multi-block grid

下载 (496KB)
8. Fig. 7. Vortex features on the panels of a multi-link contour

下载 (90KB)
9. Fig. 8. Example of solving the inverse problem for M = 0.5, ∆Су, ∆Сx – changes in the integral characteristics compared to the characteristics of the original profile

下载 (172KB)
10. Fig. 9. Example of solving the inverse problem for M = 0.6

下载 (180KB)
11. Fig. 10. Convergence of the solution of the inverse problem at M = 0.6

下载 (20KB)
12. Fig. 11. Mach number field in the mode M = 0.768, Cy = 0.75

下载 (345KB)
13. Fig. 12. Pressure distribution in the mode M = 0.768, Cy = 0.75

下载 (32KB)
14. Fig. 13. Calculated polars of cut and insulated profiles

下载 (39KB)

版权所有 © Russian Academy of Sciences, 2024