Effect of Characteristics of Polyvinyl Alcohol on the Physical and Chemical Properties of Carbon-Containing Cryogels

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Samples of cryogels based on aqueous solutions of polyvinyl alcohol were investigated. The molecular weights of cryogel samples varied from 25 × 103 to 60 × 103. It has been found out that the ultimate strength of dry briquettes increases from 1.2 to 3.7 MPa with an increase in the polymer molecular weight. The resulted briquettes can be used, for example, as a proper domestic or industrial fuel.

Texto integral

Acesso é fechado

Sobre autores

M. Fufaeva

Institute of Petroleum Chemistry, Siberian Branch of the Russian Academy of Sciences

Autor responsável pela correspondência
Email: maria81@ipc.tsc.ru
Rússia, Tomsk

V. Manzhay

the Russian Academy of Sciences

Email: mang@ipc.tsc.ru
Rússia, Tomsk

Bibliografia

  1. Лозинский В.И. // Успехи химии. 1998. Т. 67. № 7. С. 641. [Russian Chemical Reviews, 1998, vol. 67, no. 7, p. 651. https://doi.org/10.1070/RC1998v067n07ABEH000399].
  2. Hassan C.M., Peppas N.A. // Adv. Polym. Sci. 2000. V. 53. Р. 37.
  3. Ушаков С.Н. Поливиниловый спирт и его производные. М.: Изд-во АН СССР, 1960. Т. 2. 868 с.
  4. Николаев А.Ф., Орхименко Г.И. Водорастворимые полимеры. Л.: Химия, 1979. 144 с.
  5. Малкин А.Я. Основы реологии. С-Пб: Профессия, 2018. С. 474.
  6. Manzhai V.N., Fufaeva M.S., Kashlach E.S. // Chinese J. Polym. Sci. 2023. V. 41. P. 442. https://doi.org/10.1007/s10118-022-2889-8

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
2. Fig. 1. Dependence of dynamic viscosity of PVA solutions (C = 100 kg/m3) on shear rate at 20°C, where molecular mass of polymer samples: (1) 25,000 (degree of hydrolysis 88%); (2) 25,000; (3) 46,000; (4) 54,000; (5) 59,000

Baixar (76KB)
3. Fig. 2. Rheological unit constructed on the basis of Maxwell's model: (a) mock-up of the unit: (1) scale, (2) micrometer head, (3) micrometer, (4) micrometer stem, (5) cryogel sample, (6) tripod; (b) laboratory unit

Baixar (79KB)
4. Fig. 3. Dependence of instantaneous modulus of elasticity of cryogels formed from PVA samples of different molecular weight on polymer concentration, at relative deformation of samples (ε = 0.08)

Baixar (54KB)
5. Fig. 4. Cryogel: (a) microfragment of cryogel volume, polymer frame of which is formed from low molecular weight samples of polyvinyl alcohol; (b) microfragment of cryogel volume, polymer frame of which is formed from high molecular weight samples of PVA

Baixar (115KB)

Declaração de direitos autorais © Russian Academy of Sciences, 2024